[nsp] AS5300 loosing memory

Dennis Peng dpeng at cisco.com
Thu Aug 21 10:37:09 EDT 2003

What version are you running on the 5200? I wouldn't expect ACL's
to that much additional load on the router.


jlewis at lewis.org [jlewis at lewis.org] wrote:
> On Wed, 20 Aug 2003, Siva Valliappan wrote:
> > i know we added CEF support for dial-up stuff over the last couple of
> > year.  maybe Dennis can chime in.  however, loading new code may be an issue on
> > the 5200 because of flash / memory constraints  :(  it would be easier
> > with the 5300/5400s.  iirc any recent release of 12.2T should support
> > CEF with dial.
> Without lots of upgrades, that's not going to be an option.
> I tried the policy routing workaround on the virtual-template, but it 
> didn't seem to do anything / help.  There were no route-map hits, and the 
> 5200 still ran out of memory.  I guess if we have to, I can just block 
> echo/echo reply on the virtual-template.
> ----------------------------------------------------------------------
>  Jon Lewis *jlewis at lewis.org*|  I route
>  System Administrator        |  therefore you are
>  Atlantic Net                |  
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________

More information about the cisco-nsp mailing list