[nsp] AS5300 loosing memory

Siva Valliappan svalliap at cisco.com
Wed Aug 20 15:29:35 EDT 2003

don't have something handy to test with, but i worked on an bug
with vtemplates in old code that required you to configure PBR
on the physical (as well as) the v=template.  seeing your config /
version may prompt old brain cells ;(


On Wed, 20 Aug 2003 jlewis at lewis.org wrote:

> On Wed, 20 Aug 2003, Siva Valliappan wrote:
> > i know we added CEF support for dial-up stuff over the last couple of
> > year.  maybe Dennis can chime in.  however, loading new code may be an issue on
> > the 5200 because of flash / memory constraints  :(  it would be easier
> > with the 5300/5400s.  iirc any recent release of 12.2T should support
> > CEF with dial.
> Without lots of upgrades, that's not going to be an option.
> I tried the policy routing workaround on the virtual-template, but it
> didn't seem to do anything / help.  There were no route-map hits, and the
> 5200 still ran out of memory.  I guess if we have to, I can just block
> echo/echo reply on the virtual-template.
> ----------------------------------------------------------------------
>  Jon Lewis *jlewis at lewis.org*|  I route
>  System Administrator        |  therefore you are
>  Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________

More information about the cisco-nsp mailing list