[nsp] Access Server

MacKinnon, Ian Ian.MacKinnon at thus.net
Wed Dec 3 08:29:52 EST 2003


Lots of dialup examples and tips at :-
http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Technologies:T1T3E1E3&s=Implementation_and_Configuration#Samples_and_Tips


Radius stuff at :-
http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Technologies:T1T3E1E3&s=Implementation_and_Configuration#Samples_and_Tips

> -----Original Message-----
> From: Glynn S. Condez [mailto:gcondez at coollink.us]
> Sent: 03 December 2003 13:16
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Access Server
> 
> Hi all,
> 
> I am going to configure a Cisco AS5300 to handle E1 with 30 lines use for
> dialup access and the authentication is pointing to a radius server. I
> would
> like to ask the procedures/steps on how to configure. I can only configure
> the basic like setting up IP in Ethernet interface, routing but not the
> E1,
> lines and radius. I already visited Cisco site but its not very clear to
> me.
> Anyone can point me to a URL with broad explanations on how to do it from
> scratch or give me a working config that fits my requirements. I really
> appreaciate your inputs.
> 
> Thanks in advance.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list