[nsp] Access Server

[Glynn S. Condez]

Hi Ian,

Thanks for your reply.

Im sorry but I can't access the site since its password protected. I don't
have an account in CCO. :=(

Thanks

----- Original Message ----- 
From: "MacKinnon, Ian" <Ian.MacKinnon at thus.net>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, December 03, 2003 2:29 PM
Subject: RE: [nsp] Access Server


> Lots of dialup examples and tips at :-
>
http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Technologies:T1T3E1E3&s=Implementation_and_Configuration#Samples_and_Tips
>
>
> Radius stuff at :-
>
http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Technologies:T1T3E1E3&s=Implementation_and_Configuration#Samples_and_Tips
>
> > -----Original Message-----
> > From: Glynn S. Condez [mailto:gcondez at coollink.us]
> > Sent: 03 December 2003 13:16
> > To: cisco-nsp at puck.nether.net
> > Subject: [nsp] Access Server
> >
> > Hi all,
> >
> > I am going to configure a Cisco AS5300 to handle E1 with 30 lines use
for
> > dialup access and the authentication is pointing to a radius server. I
> > would
> > like to ask the procedures/steps on how to configure. I can only
configure
> > the basic like setting up IP in Ethernet interface, routing but not the
> > E1,
> > lines and radius. I already visited Cisco site but its not very clear to
> > me.
> > Anyone can point me to a URL with broad explanations on how to do it
from
> > scratch or give me a working config that fits my requirements. I really
> > appreaciate your inputs.
> >
> > Thanks in advance.
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>