[nsp] if-con or attach for FlexWANs?

Kinczli Zoltán Zoltan.Kinczli at Synergon.hu
Wed Dec 3 16:24:00 EST 2003


one can log in with ipc-con command

-z.

-----Original Message-----
From: sthaug at nethelp.no [mailto:sthaug at nethelp.no]
Sent: Wednesday, December 03, 2003 10:09 PM
To: steven_raymond at eli.net
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] if-con or attach for FlexWANs?


> Is there an equivalent way to log in to a 6500 FlexWAN card, in the same
> manner that one can if-con into a VIP2 or attach to a GSR linecard?
> Want to monitor the CPU utilization/impact of adding ACLs to a PA in a
> FlexWAN.

Don't know of a way to log in, but you can use "show controllers cwan".
With a FlexWAN in slot 4 with two PA-MC-STM-1 cards, you can look at
CPU usage with

show controllers cwan 4 0 proc cpu
show controllers cwan 4 1 proc cpu

Steinar Haug, Nethelp consulting, sthaug at nethelp.no
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Ez az üzenet és a hozzá kapcsolódó fájlok, tervezetek kizárólag a
Címzettnek szólnak, a bennük foglalt információk bizalmasak, melyek
titokban maradásához a Synergon Informatika Rt.-nek jogilag méltányolható
érdeke fuzodik. Amennyiben valamely hiba folytán Ön nem a címzettje ennek a
levélnek, kérjük, semmisítse meg, és értesítse az üzenet küldojét. Az
üzenet az elküldés elott vírusellenorzésen esett át, de a vírusmentességére
nincs semmilyen garancia, ezért kérjük, ellenorizze azt!

DISCLAIMER

This e-mail and any attached files are confidential and may be legally
privileged. The content of this e-mail is subject of efforts by Synergon to
maintain its confidentiality. Also this e-mail is intended for the sole use
of the individual or entity to whom it is addressed. If you are not the
addressee, and received this transmission in error please delete this
e-mail and notify its sender immediately. This e-mail message has been
checked for computer viruses but it could still be infected. Please test it
for viruses before use.





More information about the cisco-nsp mailing list