[nsp] Logging incoming caller id on AS5800

[John Wong]

or u can try FreeRADIUS (www.freeradius.org) for a fast (non-perl)
radius server with tons of add-in modules.

> -----Original Message-----
> From: Anthony Cennami [mailto:narziss at cdardn.net] 
> Sent: Thursday, December 04, 2003 2:10 AM
> To: Ejay Hire
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] Logging incoming caller id on AS5800
> 
> 
> RADIUS and TACACS+ are both capable of this, and can 
> accept/reject calls 
> based on the passed info.  I've personally found Radiator to 
> be a good 
> RADIUS implementation, as it is well supported and provides 
> full source 
> (Perl) with purchase (Approx $600USD when I last looked)
> 
> 
> 
> Ejay Hire wrote:
> > Hi all.
> > 
> > On a Cisco AS5800, is there a way to (sys)log the caller-id
> > of an incoming call?  We are testing an AS5800 to replace a
> > TNT for dial aggregation, and would like the ability to log
> > who is calling before the authentication process.
> > 
> > Thanks,
> > Ejay Hire
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>