[nsp] HSRP problem

[Ed Ravin]

On Wed, Dec 10, 2003 at 11:53:05AM -0600, Roger wrote:
> I have two 7206vxr's which I'm attempting to setup w/ HSRP.
> 
> RouterA
> interface Port-channel1.1
> description etherchannel link with vlan1
> encapsulation dot1Q 1 native
> ip address x.x.x.x 255.255.255.240
> standby 1 ip <shared hsrp address>
> standby 1 priority 100

Are "shared hsrp address" and "primary ip address x.x.x.x" in the same
subnet?  If not, have you configured routing for the shared HSRP address?
The last time I tried stuff like this, it didn't work unless I used an
HSRP address that was in the same subnet as one of the primary or secondary
addresses on the interface.  What does:

  show ip route <shared HSRP address>

show?