[nsp] HSRP problem

[jlewis at lewis.org]

On Wed, 10 Dec 2003, Ed Ravin wrote:

> On Wed, Dec 10, 2003 at 11:53:05AM -0600, Roger wrote:
> > I have two 7206vxr's which I'm attempting to setup w/ HSRP.
> > 
> > RouterA
> > interface Port-channel1.1
> > description etherchannel link with vlan1
> > encapsulation dot1Q 1 native
> > ip address x.x.x.x 255.255.255.240
> > standby 1 ip <shared hsrp address>
> > standby 1 priority 100
> 
> Are "shared hsrp address" and "primary ip address x.x.x.x" in the same
> subnet?  If not, have you configured routing for the shared HSRP address?
> The last time I tried stuff like this, it didn't work unless I used an
> HSRP address that was in the same subnet as one of the primary or secondary
> addresses on the interface.  What does:

I think he said they were in his first message.  I'd be more concened as
to whether HSRP and Etherchannel are compatible.  Anyone know if they're
(at least) supposed to be?

----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________