[nsp] AToM

[sthaug at nethelp.no]

> Here is the basic config i've done on the two edge routers (the configs
> are symetrical, except the destination IP addresses, of course) :
> 
> no spanning-tree vlan 42
> !
> vlan 42
>  name AToM
> !
> interface GigabitEthernet5/2
>  no ip address
>  logging event link-status
>  media-type rj45
>  speed 100
>  duplex full
>  switchport
>  switchport access vlan 42
>  switchport mode access
> !
> interface Vlan42
>  description AToM c6k03-v
>  no ip address
>  mpls l2transport route 194.117.192.203 69

The difference between this and what I've done lots of times on 7600
(Sup2/MSFC2/PFC2/GE-WAN) is that my VLANs enter the 7600 via VLAN
trunk ports, not access ports. Have you tried using a VLAN trunk?

Steinar Haug, Nethelp consulting, sthaug at nethelp.no