[nsp] EIGRP looping problem but not SIA ?

[Eric Kagan]

> > I tried the above debug but there was no output.  From telnet in I
> > configured:
> >
> > term mon
> > access-list 30 permit 10.2.68.0 255.255.252.0
> > debug ip routing 30
>
> your acl should read "access-list 30 permit 10.2.68.0 0.0.3.255"

Thanks - Actually I did do the reverse (I typed it freehand instead of copy
/ paste).  Not that this makes any sense, but per another recommendation I
made a distribution list to deny the /22 from EIGRP.  When I did that it
caused some weird routing problems so I put it back.  I had done an IOS
upgrade last Thursday night to eliminate a potential EIGRP routing loop bug
but that hadn't made a difference either.   Is it possible something got
reset when I applied the distribute list and then took it out the other
night ?  The show ip route show reports as I would expect:


#show ip rou 10.2.68.0 255.255.252.0
Routing entry for 10.2.68.0/22
  Known via "static", distance 254, metric 0 (connected)
  Redistributing via eigrp 65555
  Routing Descriptor Blocks:
  * directly connected, via Null0
      Route metric is 0, traffic share count is 1


I am going to leave things alone for a few days over the holiday and see how
they play out.

Thanks for all the suggestions and help

Eric