[nsp] Accessing devices on a VLAN trunk

[Christopher J. Wolff]

Hello,

I hope everyone had a safe holiday season.  I have a configuration as
follows:

7206				   3524
Router - Microwave radio - Switch

The Ethernet interface that the microwave radio plugs in to has a
subinterface that is configured with 802.1q encapsulation.  The port on the
switch is configured as a tagged trunk.

Now my question;  Is there any way to access the management interface on the
microwave radio (The radio will accept an ip address) even though it lives
on a VLAN trunk?

My gut answer is no; however, if I could set an IP on the router Ethernet
interface as well as the subinterfaces there should be a chance of accessing
the radio.  

Any suggestions are greatly appreciated.