[nsp] PA-MC-8TE1+ IOS????

[Martin Taylor]

Ezequiel,

	Include a sh ver. Does it show them in sh controller, if so you just
need to program the time slots. Otherwise, you could have a firmware
mismatch, did you have this card in a non-VXR 7200 previously?

marty

Marty Taylor - Backbone Network Engineer 	marty at internap.com
Internap Network Services			
250 Williams Street NW				
Suite E-100						
Atlanta, GA 30303

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ezequiel Carson
Sent: Thursday, February 13, 2003 10:11 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] PA-MC-8TE1+ IOS????

Hello,
	I have a Cisco 7206VXR NSE1 I/O 2-FE running 12.2(13)T1 and kboot
12.2(13)T1.

	
	The problem is that router is not showing the controller PA-MC-8TE1+
in
the sh ver or sh running but yes at the sh diag.

do you have any idea? 

Thanks
Ezequiel



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/