[nsp] PA-MC-8TE1+ IOS????

[Ezequiel Carson]

Nop,
	I dont have this controller in the show ver.but yes in the sh diag.


Yes i have tried it when i got it,  in a non-VXR. And it didnt work.

Ezeq.


On Thu, 2003-02-13 at 19:10, Martin Taylor wrote:
> Ezequiel,
> 
> 	Include a sh ver. Does it show them in sh controller, if so you just
> need to program the time slots. Otherwise, you could have a firmware
> mismatch, did you have this card in a non-VXR 7200 previously?
> 
> marty
> 
> Marty Taylor - Backbone Network Engineer 	marty at internap.com
> Internap Network Services			
> 250 Williams Street NW				
> Suite E-100						
> Atlanta, GA 30303
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ezequiel Carson
> Sent: Thursday, February 13, 2003 10:11 AM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] PA-MC-8TE1+ IOS????
> 
> Hello,
> 	I have a Cisco 7206VXR NSE1 I/O 2-FE running 12.2(13)T1 and kboot
> 12.2(13)T1.
> 
> 	
> 	The problem is that router is not showing the controller PA-MC-8TE1+
> in
> the sh ver or sh running but yes at the sh diag.
> 
> do you have any idea? 
> 
> Thanks
> Ezequiel
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>