[nsp] PPTP issues through 2600

[Z]

On Fri, Feb 14, 2003 at 11:58:05AM -0800, Z wrote:
> Hey list,
> 
>    Do you have to have a certain IOS version to pass PPTP traffic
> through a 2600 series router?
> 
>    I have a 2600 that has the 'sh ppp mppe' command and connecting
> to the same PPTP gateway on the Internet ( government site ) just
> fine.   On that 2600 that my clients can connect to just fine I'm
> running Version 12.1(5)T9.
> 
>    In another city my clients have a very similar setup and they get
> disconnected while trying to connect ( no filters on the site we're
> connecting to ).   The IOS version I'm running on the routers that
> don't seem to want to pass the PPTP traffic or something is:
> 12.0(5)T1 and 12.1(7b).
> 
>    The two routers that don't pass the traffic it seems don't
> exhibit the 'sh ppp mppe' command.  Note that I don't use PPTP on
> the router itself, just noticed that the one that is working has
> some sort of PPTP-ish commands available but I don't know if it
> would effect passing that traffic through the router itself.


  BTW, I've tried this again through a 3640 router that seems to
have that same 'sh ppp mppe' command and it worked flawlessly, there
has to be a pattern here.

  Can someone please confirm this?


Thanks,

.z