[nsp] back to back serial connections

[Duane de Witt]

If it is back to back you need to set your clock source on one side?

 

Regards

Duane

-----Original Message-----
From: Ajay Saini [mailto:sainiajay at hotmail.com] 
Sent: Friday, February 28, 2003 2:07 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] back to back serial connections

 

i have always used serial interfaces with frame-relay point to point
connections but just tried the back to back serial connections with
encapsulation hdlc between CISCO 7200 and Cisco 2500. I am getting the link
status as up but the protocol is down. The configs are as follow:

 

cisco7200:
interface Serial1/2
 ip address 10.70.14.1 255.255.255.252
 ip directed-broadcast
 no ip mroute-cache
 no cdp enable

 


cisco2500:
interface Serial0
 ip address 10.70.14.2 255.255.255.252
 ip directed-broadcast
 no ip mroute-cache
 no cdp enable

 

any suggestions regarding anything i am missing will be appreciated...i
tried giving on 7200 interface the dce-terminal-timing-enable command but
got the same result.

 

thanks,
Aj 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://puck.nether.net/pipermail/cisco-nsp/attachments/20030228/c99e4441/attachment.htm