[nsp] ntp on 11.2?

[Marcus Keane]

Trever, is this a 4MB switch running "original Edition Software"? The
release notes say that this switch software doesn't support NTP amongst
other things...
Marcus

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35sa6/ol0
33202.htm
 
-----Original Message-----
From: Furnish, Trever G [mailto:TGFurnish@herff-jones.com] 
Sent: 07 January 2003 05:47
To: cisco-nsp@puck.nether.net

O kind and generous nsp readers,

Am I nuts or should the ntp configuration commands be available in ios
11.2?
Specificly they seem to be missing in a switch I have running this:
IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8.10)SA6,
MAINTENANCE INTERIM SOFTWARE

misw2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
misw2(config)#ntp?
% Unrecognized command

The documentation seems to suggest they should be there...
http://www.cisco.com/en/US/products/sw/iosswrel/ps1824/products_configur
atio
n_guide_chapter09186a0080087e7c.html#xtocid13825
http://www.cisco.com/en/US/products/sw/iosswrel/ps1824/products_configur
atio
n_guide_chapter09186a0080080896.html#20367

Anyone mind sharing a release number for 11.2 later than my current
release that they can vouch for as having ntp commands available?

--
Trever
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/