[nsp] My Catalyst 2948G locked
isamar at isamarmaia.org
isamar at isamarmaia.org
Fri Jan 10 08:28:52 EST 2003
This morning my Catalyst 2948G locked completely. No ping in any
interface.
I never imagined that it could happen.
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 608ADB40 41231552 8787368 32444184 32246344 32367768
I/O 3000000 16777216 5841328 10935888 10933212 10355452
Fast 6088DB40 131072 127800 3272 3272 3228
IOS (tm) L3 Switch/Router Software (CAT2948G-IN-M), Version 12.0(7)W5(15d)
RELEASE SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 05-Jun-00 16:16 by integ
Image text-base: 0x60010928, data-base: 0x605B8000
ROM: System Bootstrap, Version 12.0(7)W5(15) RELEASE SOFTWARE
switch uptime is 24 minutes
System restarted by power-on
System image file is "bootflash:cat2948g-in-mz.120-7.W5.15d.bin"
cisco Cat2948G (R5000) processor with 49152K/16384K bytes of memory.
R5000 processor, Implementation 35, Revision 2.1
Last reset from power-on
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3z interface(s)
121K bytes of non-volatile configuration memory.
16384K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2101
More information about the cisco-nsp
mailing list