[nsp] Transparent bridging

[Nick Kraal]

I am tring transparent bridging over a WAN link. From 'show' results we can
see that everything looks fine. NetBIOS works fine and can browse the
Network Neighborhood. But I cannot ping between the hosts between each site
and the remote side cannot find the DHCP server. It seems like IP cannot
cross over the WAN link.

Any ideas of what is missing? Many thanks in advance.

-nick/

------------------------
interface Serial3/0/16:0
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip load-sharing per-packet
 ip mroute-cache
 no fair-queue
 bridge-group 1
!
interface FastEthernet4/1
 no ip address
 half-duplex
 bridge-group 1
!
bridge 1 protocol ieee

-----------------------
router#sh bridge group

Bridge Group 1 is running the IEEE compatible Spanning Tree protocol

   Port 28 (Serial3/0/16:0) of bridge group 1 is forwarding
   Port 10 (FastEthernet4/1) of bridge group 1 is forwarding