[nsp] My Catalyst 2948G locked

[Gert Doering]

Hi,

On Fri, Jan 10, 2003 at 08:28:52AM +0000, isamar at isamarmaia.org wrote:
> This morning my Catalyst 2948G locked completely. No ping in any
> interface.
> I never imagined that it could happen.
> 
>                Head   Total(b)    Used(b)    Free(b)  Lowest(b) Largest(b)
> Processor  608ADB40   41231552    8787368   32444184   32246344   32367768
>       I/O   3000000   16777216    5841328   10935888   10933212   10355452
>      Fast  6088DB40     131072     127800       3272       3272       3228
> 
> IOS (tm) L3 Switch/Router Software (CAT2948G-IN-M), Version 12.0(7)W5(15d)
> RELEASE SOFTWARE

We have a customer that is also using a 2948G-L3, and it also locks up
every now and then.  The chassis has already been swapped, various IOS
versions tested (right now we're at cat2948g-in-mz.120-14.W5.20.bin) but
still the problem persists.

It's very unusual for Cisco switches, and we are quite dissatisfied.

(We do not have direct Cisco TAC support, just our "gold partner", and
they haven't been overly helpful so far in making Cisco fix this)

If you find out anything about this, I'd be interested to hear about it.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert.doering at physik.tu-muenchen.de