[nsp] GE-IP module interoperability
Kinczli Zoltán
Zoltan.Kinczli at Synergon.hu
Tue Jan 14 11:18:15 EST 2003
Hello,
yes, it works. It will be hard to remove the PA-GE from the 7200 chassis,
as there is no arm/lever on the PA-GE. Some mechanical engineering will fix it
though :)
regards
--z.
-----Eredeti üzenet-----
Feladó: Greg Pendergrass [mailto:greg at band-x.com]
Küldve: 2002. december 18. 21:51
Címzett: Cisco-Nsp at Puck. Nether. Net
Tárgy: [nsp] GE-IP module interoperability
I'm thingking about using the GigE module out of a GE-IP in a 7204VXR. The
GE-IP is a PA-GE built into a VIP2, but I'm not sure the PA-GE module pulled
out of the GE-IP will work as a stand-alone port adapter. Has anyone done
this?
Thanks,
Greg Pendergrass
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list