[nsp] verifying IOS

Matthew Wronkowski mattw at csh.rit.edu
Thu Jan 16 08:49:51 EST 2003


On Wed, Jan 15, 2003 at 07:08:19PM -0800, Benjie Ko said tag, you're it:

> Hi,
> How can I verify  the integrity of new IOS just copied
> into an ATA PCMCIA installed at disk0 on a 7200?
> dir disk0 would give the correct size, however on
> pcmcia flash installed at slot0 or slot1, it is also
> possible to view the CRC of the IOS via show flash.
> show disk0 just gives the ata flash card geometry  and
> format info.
> Executing show flash looks at slot0 which is empty.
> Thanks.

'verify slot0:filename' will verify the checksum of the file.
'show slot0: detailed' will show the checksum.

-- 
Matthew Wronkowski, CCNP



More information about the cisco-nsp mailing list