[nsp] error on ethernet controller cisco 3550

[Robert A. Hayden]

Disable the errcondition of "loopback.

Also, make sure you set up autoclearing of errconditions (we use 30
seconds - it defaults to 5 minutes).

On Wed, 25 Jun 2003, Verstegen, Joseph wrote:

>
> Brett,
>
> I am getting the same error message and my conditions are about the same.
> Did you find out what is causing this?
>
> %ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected on [chars]. The port is
> forced to linkdown
>
> Thanks,
>
> Joe
>
> Joe Verstegen
> Network Engineer - Wisconsin
> Charter Business Networks
> 1265 John Q. Hammons Dr
> Madison, WI 53717
> Work:  (608) 826-1408
> Cell:    (608) 279-5463
> email: jverstegen at chartercom.com
> http://www.charterbusinessnetworks.com
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>