[nsp] Fabric-enabled module in Cat6500 without SFM?

[Winslow, Michael]

Works fine

	-----Original Message----- 
	From: Nipper, Arnold [mailto:arnold at nipper.de] 
	Sent: Fri 7/11/2003 3:57 AM 
	To: Lars Fenneberg; cisco-nsp at puck.nether.net 
	Cc: 
	Subject: Re: [nsp] Fabric-enabled module in Cat6500 without SFM?
	
	

	Of course it will work,
	
	
	Arnold
	--
	Arnold Nipper / nIPper consulting, Sandhausen, Germany
	email: arnold at nipper.de
	phone:/mobile: +49 172 2650958
	fax: +49 6224 9259 333
	
	
	On Friday, July 11, 2003 9:45 AM, Lars Fenneberg <lf at elemental.net> wrote:
	> Morning!
	>
	> Just a short question: Will a fabric-enabled module (in my case a
	> WS-X6548-GE-TX) work in a Catalyst 6500 without SFM and with Sup-1A
	> installed?  Or in a Catalyst 6000? The documentation implies that it
	should
	> work, but I want to double check. Thanks.
	>
	> Cheers,
	> Lars.
	
	_______________________________________________
	cisco-nsp mailing list  cisco-nsp at puck.nether.net
	http://puck.nether.net/mailman/listinfo/cisco-nsp
	archive at http://puck.nether.net/pipermail/cisco-nsp/