[nsp] Fabric-enabled module in Cat6500 without SFM?

[Sukumar Subburayan]

A point to note is pure fabric-modules (ie modules which do not have a bus
connection, such as a 6816) will not work without a SFM.

sukumar

On Jul 11, 10:57am, Nipper, Arnold wrote:
> Subject: Re: [nsp] Fabric-enabled module in Cat6500 without SFM?
> Of course it will work,
>
>
> Arnold
> --
> Arnold Nipper / nIPper consulting, Sandhausen, Germany
> email: arnold at nipper.de
> phone:/mobile: +49 172 2650958
> fax: +49 6224 9259 333
>
>
> On Friday, July 11, 2003 9:45 AM, Lars Fenneberg <lf at elemental.net> wrote:
> > Morning!
> >
> > Just a short question: Will a fabric-enabled module (in my case a
> > WS-X6548-GE-TX) work in a Catalyst 6500 without SFM and with Sup-1A
> > installed?  Or in a Catalyst 6000? The documentation implies that it
> should
> > work, but I want to double check. Thanks.
> >
> > Cheers,
> > Lars.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>-- End of excerpt from Nipper, Arnold