[nsp] PPPoE over an IEEE 802.1Q VLAN

[jlewis at lewis.org]

http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a0080080386.html

I found out the hard way that this feature, present in late 12.1T, is not 
in 12.2S.  Also, when going back to 12.1(5)T12, putting pppoe enable back 
into the appropriate subinterface crashes the router with

System returned to ROM by bus error at PC 0x0, address 0x0

I did this twice in a row before shutting the fastE interface before 
entering pppoe enable.  That made the router able to accept the command 
without crashing.

Anyway...PPPoE over an IEEE 802.1Q VLAN doesn't seem to be a searchable
feature in go/fn.  So, are there plans to support this (or even just PPPoE
on regular fastE interfaces...it actually isn't supported at all in 12.2S)
in 12.2S at some point, or are we stuck with 12.1T on these routers?
 
----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 System Administrator        |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________