[nsp] NPE-G1

[Ezequiel Carson]

my npe-g1 reached the same utilization, from one GIGE to another GIGE
using  ~27% of CPU.( it has 12.2(14)S1 ).


ezeq.

On Wed, 2003-07-16 at 13:59, Charles Von Dartmooth wrote:
> Hello,
>    After reading the recent posts regarding the
> NPE-G1, I'm considering upgrading from an NPE-400 to a
> G1. Can someone who's done such an upgrade share what
> sort of performance increase they've seen? The router
> in question  is a 7206VXR pushing about 320Mbps
> (~80Kpps) from 1 PA-GE to another (straight IP nothing
> fancy) with no other cards. It does around 60-70% CPU
> doing this much BW. I'm looking to increase the amount
> of BW being pushed through the router and am wondering
> what I can expect the CPU % to drop to by just
> switching to the G1. 
> 
> Thanks! Charles
> 
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>