[nsp] which ios?

[Christopher J. Wolff]

I'm going to test that theory in a few minutes.  I'm loading up a
CAT6000-SUP1/MSFC2 for a hybrid configuration.  The CAT6000-MSFC2 did
not recognize my flexwan or any of the PA's. Keep your fingers crossed
;)

Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com 

-----Original Message-----
From: Matt Stockdale [mailto:mstockda at logicworks.net] 
Sent: Thursday, July 17, 2003 11:28 PM
To: Christopher J. Wolff
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] which ios?

My understanding is that the CAT6000-MSFC2 is for running a hybrid
CatOS/IOS image (and comprises only the IOS portion), while the
CAT6000-SUP1/MSFC2 file is if you're running only IOS on the unit.

At least, I hope so, since after I upgrade this last 7200 I'm moving on
to our 6500's.

Matt

On Fri, 2003-07-18 at 02:04, Christopher J. Wolff wrote:
> If I have a 6509 with flexwan, Sup1A and Msfc2, would I choose the
> CAT6000-MSFC2 image or the CAT6000-SUP1/MSFC2.  Right now the
> Cat6000-msfc2 image doesn't recognize my flexwan card ;)
> 
> Christopher J. Wolff, VP CIO
> Broadband Laboratories, Inc.
> http://www.bblabs.com
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
-- 
------------------------------------------
Matt Stockdale              Logicworks
Sr. Network Engineer    www.logicworks.net
mstockda at logicworks.net  (212) 625-5307