[nsp] which ios?

[Matt Stockdale]

I just successfully upgraded my 6500 SUP1A/MSFC1 Hybrid CatOS/IOS with
c6msfc-pk2sv-mz.121-19.E1.bin. so far so good. (of course, all I've got
in it are 2 48 port fast e blades. No flexwan)

Matt

On Fri, 2003-07-18 at 02:30, Christopher J. Wolff wrote:
> I'm going to test that theory in a few minutes.  I'm loading up a
> CAT6000-SUP1/MSFC2 for a hybrid configuration.  The CAT6000-MSFC2 did
> not recognize my flexwan or any of the PA's. Keep your fingers crossed
> ;)
> 
> Christopher J. Wolff, VP CIO
> Broadband Laboratories, Inc.
> http://www.bblabs.com
> 
> -----Original Message-----
> From: Matt Stockdale [mailto:mstockda at logicworks.net] 
> Sent: Thursday, July 17, 2003 11:28 PM
> To: Christopher J. Wolff
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] which ios?
> 
> My understanding is that the CAT6000-MSFC2 is for running a hybrid
> CatOS/IOS image (and comprises only the IOS portion), while the
> CAT6000-SUP1/MSFC2 file is if you're running only IOS on the unit.
> 
> At least, I hope so, since after I upgrade this last 7200 I'm moving on
> to our 6500's.
> 
> Matt
> 
> On Fri, 2003-07-18 at 02:04, Christopher J. Wolff wrote:
> > If I have a 6509 with flexwan, Sup1A and Msfc2, would I choose the
> > CAT6000-MSFC2 image or the CAT6000-SUP1/MSFC2.  Right now the
> > Cat6000-msfc2 image doesn't recognize my flexwan card ;)
> > 
> > Christopher J. Wolff, VP CIO
> > Broadband Laboratories, Inc.
> > http://www.bblabs.com
> > 
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
-- 
------------------------------------------
Matt Stockdale              Logicworks
Sr. Network Engineer    www.logicworks.net
mstockda at logicworks.net  (212) 625-5307