[nsp] which ios?

[Christopher J. Wolff]

Yes sir.  I ended up using c6msfc2-psv-mz.121-19.E1.bin.  Thank you for
your recommendation.

Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com 

-----Original Message-----
From: Alex Rubenstein [mailto:alex at nac.net] 
Sent: Friday, July 18, 2003 4:57 AM
To: Christopher J. Wolff
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] which ios?



You did use a 'psv' image (v is important), right?

12.1.19E1 PSV should work.



On Thu, 17 Jul 2003, Christopher J. Wolff wrote:

> If I have a 6509 with flexwan, Sup1A and Msfc2, would I choose the
> CAT6000-MSFC2 image or the CAT6000-SUP1/MSFC2.  Right now the
> Cat6000-msfc2 image doesn't recognize my flexwan card ;)
>
> Christopher J. Wolff, VP CIO
> Broadband Laboratories, Inc.
> http://www.bblabs.com
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben --
--    Net Access Corporation, 800-NET-ME-36, http://www.nac.net   --