[nsp] Holy crap!

Christopher J. Wolff chris at bblabs.com
Fri Jul 18 12:01:28 EDT 2003


Wow thank you for the explanation!  If I didn't step away from the
console long enough to get a drink I would still be loading IOS's!

Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com 

-----Original Message-----
From: Sukumar Subburayan [mailto:sukumars at cisco.com] 
Sent: Friday, July 18, 2003 9:52 AM
To: Iva Cabric; Christopher J. Wolff
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] Holy crap!

When you upgraded the code to 12.1(19)E1 from another release, the
FlexWAN
related code which is bundled with the new IOS has to be downloaded to
the
FlexWAN.

Depending on how many flexwans you have it may take a while. This
happens only
during on the first upgrade. After the first upgrade, if you reload the
box
again, all the Flexwans should come up right way, as they have the same
code as
that of the running IOS.

Hope this clarifies.

sukumar


On Jul 18, 10:16am, Iva Cabric wrote:
> Subject: Re: [nsp] Holy crap!
> On Fri, Jul 18, 2003 at 12:06:42AM -0700, Christopher J. Wolff wrote:
> > Hello again :)
> >
> > I hope I'm not seeing things but something very odd just happened.
> >
> > I installed (C6MSFC2-PSV-M), Version 12.1(19)E1.  When I reloaded
the
> > router there were no Flexwan/DS3/DS1 interfaces.  So I'm getting
ready
> > to back-rev to a version I know works, when all of a sudden my pager
> > goes off and says all of the Serial lines are back up.  I look at
the
> > running config and the serial interfaces are back in there.
> >
> > Is it possible that flexwan initialization is delayed several
minutes
> > after a reload?
>
> It surely is delayed, but for how long it probably depends on switch
> configuration (number of modules...) and IOS configuration.
>
> I am testing new Sup720, and when I boot 6500 (only Sup720 and FlexWAN
are
> inside) with empty startup configuration, FlexWAN becomes active after
90
> seconds:
>
> 00:01:26: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum
Diagnostics...
> 00:01:26: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
> 00:01:27: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are
now
online
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>-- End of excerpt from Iva Cabric




More information about the cisco-nsp mailing list