[nsp] deciphering a GEIP error

[William F. Maton]

On Mon, 28 Jul 2003, Jared Mauch wrote:

> > Slot 5:
> >         Physical slot 5, ~physical slot 0xA, logical slot 0, CBus 0
> >         Internal Instruction Error, Microcode Status 0x0
>           ^^^^^^^^^^^^^^^^^^^^^^^^^^
[snip]
> 	1) enable 'service single-slot-reload'
> (this will allow the system to handle OIR and other events more gracefully
> without being too disruptive to the rest of the bus)
>
> 	2) reseat the card to insure that it's not taking errors due to
> poor connection to the backplane.

Thanks Jared.  I also got the console logs from the remote site which
might shed even more light:

Jul 28 10:53:16.410: %DBUS-3-SW_NOTRDY: DBUS software not ready after RESET, ela
psed 13032, status 0x40
-Traceback= 404258D4 40426680 4042AF04 40423CAC 404240F8 40424560 404289A0 4042E
540 40384884 40384870
Jul 28 10:55:06.766: %DBUS-3-SW_NOTRDY: DBUS software not ready after DOWNLOAD,
elapsed 24012, status 0x40
-Traceback= 404258D4 4042B1F4 40423CAC 404240F8 40424560 404289A0 4042E540 40384
884 40384870
Jul 28 10:55:06.770: %DBUS-3-WCSLDERR: Slot 5, error loading WCS, status 0x40 cm
d/data 0xBA pos 3175346
Jul 28 10:55:06.770: %UCODE-3-LDFAIL: Unable to download ucode from system image
 in slot 5, trying rom ucode
Jul 28 10:55:06.770: %OIR-6-INSCARD: Card inserted in slot 5, interfaces adminis
tratively shut down
Jul 28 10:55:06.974: %RSP-3-NOSTART: No microcode for GEIP card, slot 5


wfms