[nsp] deciphering a GEIP error

[Jared Mauch]

On Mon, Jul 28, 2003 at 10:46:49AM -0400, William F. Maton wrote:
> On Mon, 28 Jul 2003, Jared Mauch wrote:
> 
> > > Slot 5:
> > >         Physical slot 5, ~physical slot 0xA, logical slot 0, CBus 0
> > >         Internal Instruction Error, Microcode Status 0x0
> >           ^^^^^^^^^^^^^^^^^^^^^^^^^^
> [snip]
> > 	1) enable 'service single-slot-reload'
> > (this will allow the system to handle OIR and other events more gracefully
> > without being too disruptive to the rest of the bus)
> >
> > 	2) reseat the card to insure that it's not taking errors due to
> > poor connection to the backplane.
> 
> Thanks Jared.  I also got the console logs from the remote site which
> might shed even more light:
> 

	Looks like a reseat/OIR will fix it to me, unless of course the
board is dead.

	- jared