[nsp] Net Telnet Cisco PERL Script help

[rpcbind at speakeasy.net]

Don't bother. Check out pancho at the COSI site, it'll do all this via 
CISCO-BULK-FILE-MIB. If you're at all comfortable tinkering w/ snmp can always 
do it yourself:

  http://www.cisco.com/en/US/customer/tech/tk648/tk362/technologies_configuration_example09186a0080094c6a.shtml

General rule is if you find yourself having to script against an interactive 
shell, you're probably doing it the wrong way...

On Tue, 29 Jul 2003, Brennan_Murphy at NAI.com wrote:

> I'm trying to write a script to upload IOS images
> to flash on 3700 series routers. I keep getting
> timeout errors though. I was wondering if anyone
> has some experience working with the Net-Telnet-Cisco
> perl module and could lend some advice and/or
> actually, sample scripts would be better. 
> 
> Ive spent a couple days looking through sourcefourge,
> newsgroups, the web etc.  I've checked COSI, etc.
> I'm not a programmer but I can see how it can be
> addicting when your close to solving something. 
> 
> I think it would be useful if there were a place
> where people could post their sample scripts...in
> the spirit of the perl module. I'm happy to share
> any other scripts that I have--just need some
> help with this one.  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>