[nsp] IOS and CatOS on the same switch?

Temkin, David temkin at sig.com
Mon Jun 2 10:58:23 EDT 2003


Has anyone ever set up a switch (or is it possible to...) to boot a switch
into IOS via a PCMCIA flash card for testing purposes, and then reboot it
off the internal flash back to CatOS to bring it back into production?

I need to do some voice testing but can't bring the card down just yet, and
the voice modules require IOS...

Thanks,

-Dave

David Temkin
S-I-G
401 City Avenue
Bala Cynwyd, PA 19004
http://www.sig.com <http://www.sig.com> 
(610) 617-2889 voice
(610) 617-3889 fax
(610) 747-2345 networking helpdesk



IMPORTANT:The information contained in this email and/or its attachments is
confidential. If you are not the intended recipient, please notify the
sender immediately by reply and immediately delete this message and all its
attachments.  Any review, use, reproduction, disclosure or dissemination of
this message or any attachment by an unintended recipient is strictly
prohibited.  Neither this message nor any attachment is intended as or
should be construed as an offer, solicitation or recommendation to buy or
sell any security or other financial instrument.  Neither the sender, his or
her employer nor any of their respective affiliates makes any warranties as
to the completeness or accuracy of any of the information contained herein
or that this message or any of its attachments is free of viruses.




More information about the cisco-nsp mailing list