[nsp] MRTG Monitoring

[Security]

I think that the problem with ifindex is that everytime you install a new
interface card to another slot on the router (We have 7500), the ifindex
changes and therefore you have to change the mrtg configuration to take
into account the new ifindex.
>On Mon, Jun 02, 2003 at 02:31:26PM +0300, M.palis wrote:
>> 
>> Target[lykpop]: /ipadress:x.x.x.x at x.x.x.x
>> MaxBytes[testpop]: 12500000
>> AbsMax[testpop]: 13000000
>> Title[testpop]: Traffic Analysis for Lykavitos POP
>> PageTop[testpop]: <H3></H3>
>> PageFoot[testpop]:
>> kilo[ltestpop]: 1024
>> Directory[ltestpop]: lykpop
>> Options[testpop]: growright, bits
>> (
>> interface GigabitEthernet1/0/0
>>  no ip address
>>  load-interval 30
>>  negotiation auto
>>  no cdp enable
>> !
>> interface GigabitEthernet1/0/0.1
>>  encapsulation dot1Q 38
>>  ip address x.x.x.x 255.255.255.240
>>   no cdp enable
>> !
>> interface GigabitEthernet1/0/0.2
>>  description Connected to vlan 16 for Access Servers
>>  encapsulation dot1Q 16
>>  ip address x.x.x.x 255.255.255.240
>
>Depending on your IOS, the command
>
>sh snmp mib ifmib ifindex interface GigabitEthernet1/0/0.2
>
>should give the ifIndex for GigabitEthernet1/0/0.2
>
>Then, use that ifIndex:
>
>Target[lykpop]: ifIndex:community at x.x.x.x:
>
>
>
_____________________________
CYTANET WebMail
http://webmail.cytanet.com.cy