[nsp] NM-AIC-64

[MacKinnon, Ian]

Well the docs seem to suggest the cables are straight through, so I would have thought that should work.
Is there power on the pin 1 ?


> -----Original Message-----
> From: Simon Lockhart [mailto:simonl at rd.bbc.co.uk]
> Sent: 16 June 2003 14:24
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] NM-AIC-64
> 
> 
> Does anyone have any experience of the NM-AIC-64?
> 
> Specifically, does anyone have the pinouts of the SCSI-2 
> connectors on the
> back of the card? I'm trying to use it without the 
> AIC-SGL-PNL panel, and
> foolishly thought that the pinouts would be the same as on 
> the panel, but
> that doesn't seem to be working - I'm shorting pins 1+26 on 
> connector 1,
> expecting alarm 1 to trigger, but it's not happening.
> 
> Am I missing something fundamental here?
> 
> Simon
> -- 
> Simon Lockhart         |   Tel: +44 (0)1628 407720 (x37720) | 
> Si fractum 
> Technology Manager     |   Fax: +44 (0)1628 407701 (x37701) | 
> non sit, noli 
> BBC Internet Services  | Email: Simon.Lockhart at bbc.co.uk    | 
> id reficere
> BBC Technology, Maiden House, Vanwall Road, Maidenhead. SL6 4UB. UK
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>