[nsp] is it possible to load balance multiple ADSL?

[lexus]

I am the AdSL provider.  All adsl's are coming off just 1 router and
runs pppoe.  Our customers want more than 1.5meg down.  Upload is not
critical.  In some areas where 7 meg down is available, great.  For the
other areas where 768K or 1.5M is the max, we want to load share
(combine several adsl) on the customer side.  If this is possible, what
hardware is needed on the customer side?

On the provider side, it is a 7206 (non-vxr)+ PA-A3-OC3MM.

Thanks
-ken

-----Original Message-----
From: Bob Collie [mailto:bob at ena.com] 
Sent: Tuesday, June 24, 2003 2:08 AM
To: lexus; cisco-nsp at puck.nether.net
Subject: RE: [nsp] is it possible to load balance multiple ADSL?

If they are all from the same router to another, it would be easy to do
PPPoE or PPPoA multilink (on most gear).  If not, you could do multiple
equal cost static routes to the destination and that should pretty much
do the trick.

If you furnish more info, everyone here should be able to get more
specific.

-Bob

-----Original Message-----
From: lexus [mailto:lexus at ince.st] 
Sent: Monday, June 23, 2003 11:37 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] is it possible to load balance multiple ADSL?


Hi, is it possible to load balance multiple ADSL's?  I am only
interested in inbound, very little outbound.  

 

Thanks

-ken

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/