[nsp] is it possible to load balance multiple ADSL?

[mac]

Yes is possible. Already done on my part.

Mac

On Martedì, giu 24, 2003, at 13:12 Europe/Rome, lexus wrote:

> I am the AdSL provider.  All adsl's are coming off just 1 router and
> runs pppoe.  Our customers want more than 1.5meg down.  Upload is not
> critical.  In some areas where 7 meg down is available, great.  For the
> other areas where 768K or 1.5M is the max, we want to load share
> (combine several adsl) on the customer side.  If this is possible, what
> hardware is needed on the customer side?
>
> On the provider side, it is a 7206 (non-vxr)+ PA-A3-OC3MM.
>
> Thanks
> -ken
>
> -----Original Message-----
> From: Bob Collie [mailto:bob at ena.com]
> Sent: Tuesday, June 24, 2003 2:08 AM
> To: lexus; cisco-nsp at puck.nether.net
> Subject: RE: [nsp] is it possible to load balance multiple ADSL?
>
> If they are all from the same router to another, it would be easy to do
> PPPoE or PPPoA multilink (on most gear).  If not, you could do multiple
> equal cost static routes to the destination and that should pretty much
> do the trick.
>
> If you furnish more info, everyone here should be able to get more
> specific.
>
> -Bob
>
> -----Original Message-----
> From: lexus [mailto:lexus at ince.st]
> Sent: Monday, June 23, 2003 11:37 PM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] is it possible to load balance multiple ADSL?
>
>
> Hi, is it possible to load balance multiple ADSL's?  I am only
> interested in inbound, very little outbound.
>
>
>
> Thanks
>
> -ken
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>