[nsp] EIGRP and loopback

[James-lists]

I have and edge and core router which are connected via Fast Ethernet, 
this is the only path between them. I wish to use the loopback to exchange
EIGRP routing information. Will this config do what I want:

On edge router:
router eigrp 101
neighbor <IP of core ethernet if> loopback0

Or should I do (on edge):
router eigrp 101
neighbor <IP of core loopback if> loopback0

James Edwards
Routing and Security
jamesh at cybermesa.com
At the Santa Fe Office: Internet at Cyber Mesa
Store hours: 9-6 Monday through Friday
Phone support 365 days till 10 pm via the Santa Fe office: