[nsp] EIGRP and loopback

[Stephen J. Wilcox]

Ooh, why do you want to do that?

If theyre on FE just config them as 

network w.x.y.z 0.0.0.3 

where w.x.y.z is the /30 on the FE

and EIGRP will discover each other by multicast without configuring explicit 
neighbors.

Steve


On Thu, 26 Jun 2003, James-lists wrote:

> I have and edge and core router which are connected via Fast Ethernet, 
> this is the only path between them. I wish to use the loopback to exchange
> EIGRP routing information. Will this config do what I want:
> 
> On edge router:
> router eigrp 101
> neighbor <IP of core ethernet if> loopback0
> 
> Or should I do (on edge):
> router eigrp 101
> neighbor <IP of core loopback if> loopback0
> 
> James Edwards
> Routing and Security
> jamesh at cybermesa.com
> At the Santa Fe Office: Internet at Cyber Mesa
> Store hours: 9-6 Monday through Friday
> Phone support 365 days till 10 pm via the Santa Fe office:
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>