[Re: [nsp] looking for a 12.0.nS recommendation]

[Joshua Smith]

i don't think that they had ported all of the rpr+ features to
12.2*S yet

jlewis at lewis.org wrote:
> On Tue, 4 Mar 2003, Jared Mauch wrote:
> 
> > > If it's just a VIP issue, I wonder if it'll be an issue at all in
7200's?  
> > > Other than the SNMP counters, I haven't noticed any serious problems
with 
> > > 12.0.24S on the 7513.  Guess I'll give it a try on some 7206vxr's.
> > 
> > 	Call me daring, but i've found 12.2(14)S works well on 7200s.
> > 
> > 	No bugs (yet).
> 
> ok...I decided to live on the edge with our 7513 having the SNMP counter 
> brokenness and upgraded it to 12.2(14)S.  It's working so far, but I've 
> noticed a few strange things.  Here's some diff extracts from rancid.
> 
> The physical memory is seen/accounted for differently.
> 
> - !Memory: main 262208K/2072K                                               
   
> + !Memory: main 262144K/2072K              
> 
> Port adaptor naming has changed...not a big deal, just mentioning it.  
> i.e.
> 
> - !Slot 0/VIP2 R5K/PA 0: type PA-FE-TX=, 1 ports                            
   
> + !Slot 0/VIP2 R5K/PA 0: type 100BaseTX-ISL, 1 ports                        
   
> 
> This is a little odd though.
> 
> + no service single-slot-reload-enable                                      
   
>   service timestamps debug datetime                                         
   
>   service timestamps log datetime                                           
   
>   service password-encryption                                               
   
> - service single-slot-reload-enable                                         
   
> + no service single-slot-reload-enable                 
> 
> Is single-slot-reload not supported now?...and why's it in there twice?  
> 
> (config)#service single-slot-reload-enable 
> % Ambiguous command:  "service single-slot-reload-enable "
> 
> (config)#service single-slot-reload-enable?
> single-slot-reload-enable  single-slot-reload-enable  
> 
> (config)#service single-slot-reload-enable ?
>   <cr>
>   <cr>
> 
> Whats up with that?
> 
> Any idea why upgrading disabled redundancy?
> 
> - redundancy                                                                
   
> -  no keepalive-enable                                                      
   
> -  mode hsa                 
> 
> At the moment, ethernet counters are working again, but if the 12.0S bug 
> is still present, it'll take a week or two for them to stop updating.
> 
> ----------------------------------------------------------------------
>  Jon Lewis *jlewis at lewis.org*|  I route
>  System Administrator        |  therefore you are
>  Atlantic Net                |  
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



"Walk with me through the Universe,
 And along the way see how all of us are Connected.
 Feast the eyes of your Soul,
 On the Love that abounds.
 In all places at once, seemingly endless,
 Like your own existence."
     - Stephen Hawking -