[nsp] accessing MSFC IOS from supervisor flash

[Colin Jenkinson]

John,

You are only able to copy from  SUP flash files systems to MSFC file
systems. 


msfc2#copy ?
  /erase          Erase destination file system.
  bootflash:      Copy from bootflash: file system
  ftp:            Copy from ftp: file system
  microcode:      Copy from microcode: file system
  null:           Copy from null: file system
  nvram:          Copy from nvram: file system
  rcp:            Copy from rcp: file system
  running-config  Copy from current system configuration
  slavenvram:     Copy from slavenvram: file system
  startup-config  Copy from startup configuration
  sup-bootflash:  Copy from sup-bootflash: file system
  sup-disk0:      Copy from sup-disk0: file system
  sup-slot0:      Copy from sup-slot0: file system
  system:         Copy from system: file system
  tftp:           Copy from tftp: file system


or BOOT from them. 

e.g.

msfc2(config)#boot system flash sup-slot0:ios-image.bin

or

msfc2(config)#boot system flash sup-bootflash:ios-image.bin

etc.

Hope this helps.

-- 
   Colin E Jenkinson
   Team Member Networking
   Information Technology Directorate
   University of Western Sydney                  
mailto:C.Jenkinson at uws.edu.au


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of John Smith
Sent: Thursday, March 06, 2003 1:30 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] accessing MSFC IOS from supervisor flash


Ok dumb question.. but I can't figure out how to get the MSFC to access IOS
that is stored on the Sup flash.  Running hybrid of course.

Any help would be appreciated. :)

Thanks.


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/