[nsp] Gigabit Ethernet over SDH/Sonet

Edoardo.Martelli at cern.ch Edoardo.Martelli at cern.ch
Thu Mar 6 18:10:37 EST 2003


Have you tried  to disable speed autonegotiation of the Cisco GBeth's?

Edoardo

On Thu, Mar 06, 2003 at 05:06:40PM +0000, Eoin Kenny wrote:
> 
> Hi all,
> I am trying to bring up a new point to point Gigabit Ethernet leased 
> line from a service provider for over a week now, without any luck!!
> The set up is as follows:
> 
> GSR ----Optera Metro DWDM ring ----Ethernet over SDH ring-----Optera 
> Metro DWDM ring -----GSR
> 
> We  have existing GE circuits working over the DWDM rings without any 
> problems. I also get local loop on my GSRs when the provider puts a 
> local software loop on the Optera equipment. The new element to our 
> usual setup is the EoSDH ring.
> 
> I am using 1000Base SX Gbics in the GSRs and the providers equipment is 
> an Nortel STM64 ring with EoSDH cards, using GFP (generic framing protocol).
> Does anyone have any advice/experience of using GE Gbics with Etherent 
> over SDH equipment? Or any suggestions on what may be wrong?
> 
> Thanks for your help.
> Eoin
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
edoardo.martelli at cern.ch
phone: +41.22.76.75026



More information about the cisco-nsp mailing list