[nsp] PPP Multilink problem.
mahesh_s
mahesh_s at stpb.soft.net
Tue Mar 18 03:52:10 EST 2003
Hi,
I have a very basic question, We have a multilink configured for
2*E1 links & the issue is the 5 min input/output on the multilink
interface is double the sum of indivudal interface.
Millennium>sh inter multilink 1
Multilink1 is up, line protocol is up
Encapsulation PPP, loopback not set
DTR is pulsed for 2 seconds on reset
LCP Open, multilink Open
Open: IPCP
5 minute input rate 197000 bits/sec, 182 packets/sec
5 minute output rate 2153000 bits/sec, 200 packets/sec
Millennium>sh int s9/0/2
Serial9/0/2 is up, line protocol is up
Encapsulation PPP, crc 16, loopback not set
LCP Open, multilink Open
5 minute input rate 96000 bits/sec, 109 packets/sec
5 minute output rate 614000 bits/sec, 116 packets/sec
Millennium>sh int s10/0
Serial10/0 is up, line protocol is up
Encapsulation PPP, crc 16, loopback not set
LCP Open, multilink Open
5 minute input rate 96000 bits/sec, 109 packets/sec
5 minute output rate 463000 bits/sec, 83 packets/sec
Is this a normal behaviour or is there any issue?
rgds
Mahesh.S
More information about the cisco-nsp
mailing list