[nsp] CISCO 3600 + RADIUS

[Rafa Marín López]

Hello all.

I can't solve my problem yet. Could someone help me?

Thank you very much...

Rafa Marín López escribió:

> Hello Chris
>
> Chris Parker escribió:
>
>> At 02:56 PM 3/21/2003 +0100, Rafa Marín López wrote:
>>
>>> Hello all.
>>>
>>> Has someone configured a CISCO 3600 in order to send router 
>>> advertisement through a virtual-access cloned from virtual-template 
>>> through a RADIUS server?
>>>
>>> You will see , my radius server is freeradius and I have an user as 
>>> it is following written :
>>>
>>> rafa  Auth-Type := Local, User-Password == "wilma"
>>>       Service-Type = Framed-User,
>>>       Framed-Protocol = PPP,
>>>       Framed-MTU = 1480,
>>>       cisco-avpair = "ipv6:prefix=3ffe:ffff:1::/64 onlink autoconfig",
>>>       cisco-avpair = "ipv6:route#1=3ffe:ffff:1::/64"
>>
>>
>>
>> You should make sure that you are getting both VS attributes back from
>> the FreeRADIUS server. 
>
>
> The respose obtained in CISCO router is :
> authenticator A7 C7 C5 05 CC C7 21 6A - 11 3A 1B D2 35 55 8F CE
> 22:52:48: RADIUS:  Framed-Protocol     [7]   6   
> PPP                       [1]
> 22:52:48: RADIUS:  User-Name           [1]   13  "rafa at umu.es"
> 22:52:48: RADIUS:  CHAP-Password       [3]   19  *
> 22:52:48: RADIUS:  NAS-Port-Type       [61]  6   
> Virtual                   [5]
> 22:52:48: RADIUS:  NAS-Port            [5]   6   
> 0                        22:52:48: RADIUS:  Service-Type        [6]   
> 6   Framed                    [2]
> 22:52:48: RADIUS:  NAS-IP-Address      [4]   6   
> 155.54.95.1              22:52:48: RADIUS: Received from id 21645/25 
> 155.54.95.11:1812, Access-Accept, len 100
> 22:52:48: RADIUS:  authenticator DD BA 41 F2 6C B3 E9 BB - A8 1E FD F9 
> 15 80 72 AF
> 22:52:48: RADIUS:  Service-Type        [6]   6   
> Framed                    [2]
> 22:52:48: RADIUS:  Framed-Protocol     [7]   6   
> PPP                       [1]
> 22:52:48: RADIUS:  Framed-MTU          [12]  6   
> 1480                     22:52:48: RADIUS:  Vendor, Cisco       [26]  
> 62 22:52:48: RADIUS:   Cisco AVpair       [1]   56  
> "ipv6:prefix#3+=2001:800:40:2C61::/64 onlink autoconfig"
> 22:52:48: RADIUS(0000001B): Received from id 21645/25
> 22:52:49: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to up
> 22:52:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> Virtual-Access3, changed state to up
>
> However , it does not send the prefix in router advertisement... :(
>
>
>
>
>
>>
>>
>> For multiple attributes to be sent you should used the '+=' operator
>> instead of the '=' operator for your cisco-avpair reply-items.
>>
>> As for the cisco side, not sure what else to suggest.
>>
>> -Chris
>>
>> -- 
>>    \\\|||///  \          StarNet Inc.      \         Chris Parker
>>    \ ~   ~ /   \       WX *is* Wireless!    \   Director, Engineering
>>    | @   @ |    \   http://www.starnetwx.net \      (847) 963-0116
>> oOo---(_)---oOo--\------------------------------------------------------
>>                   \ Wholesale Internet Services - http://www.megapop.net
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>

-- 
------------------------------------------------------
Rafael Marin Lopez
Faculty of Computer Science-University of Murcia
30071 Murcia - Spain
Telf: +34968364644	e-mail: rafa at dif.um.es
------------------------------------------------------