[nsp] PPPoE over serial link.

[Jack.W.Parks at alltel.com]

Off the top of my head...
I would use L2TP.  PPP cannot traverse "routed" links w/o a tunneling mechanism.  I think bridging the interface together should work, but is not scalable.

Jack W. Parks IV
Sr. Network Engineer
ALLTEL Communications
jack.w.parks at alltel.com
Work: 501-905-5961
Cell: 501-680-3341


-----Original Message-----
From: Rafa Marín López [mailto:rafa at dif.um.es] 
Sent: Wednesday, March 26, 2003 12:05 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] PPPoE over serial link.


Hello all

I would like to know if it is possible to transport PPPoE connections 
over a serial link. My actual configuration is:

FreeBSD                  <------------------>  CPE (cisco 2600) 
<------------------> NAS (3600)
(PPPoE client)                   Ethernet                             
                     PPP serial link                PPPoE server

My question is how could I encapsulate PPPoE client's request to PPPoE 
server over PPP serial link? is it possible?

Thank you very much.


-- 
------------------------------------------------------
Rafael Marin Lopez
Faculty of Computer Science-University of Murcia
30071 Murcia - Spain
Telf: +34968364644	e-mail: rafa at dif.um.es
------------------------------------------------------


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/