[nsp] Strange 7200 T1 Card issue

[Jim Devane]

All,

Doh! I feel so foolish.
Configuring channel groups of course solved the "strange" problem.

Thank you for everyone's responses!

Jim

----- Original Message ----- 
From: "John Osmon" <josmon at rigozsaurus.com>
To: "Jim Devane" <jim at powerpulse.cc>
Sent: Monday, May 05, 2003 12:33 PM
Subject: Re: [nsp] Strange 7200 T1 Card issue


> > I have a production 7206 (non-VXR)/225 running 12.2.10 and it has 2
> > PA-MC4T1 cards in it that run great. I recently tried to add a third
> > PA-MC4T1 card and the controllers for the card show up but the router
> > does not show the serial interfaces!
> 
> 
> Did you setup the channel-group?
> 
> controller T1 4/0
>  channel-group 0 timeslots 1-24
> 
> 
> Interface s4/0:0 doesn't exist until you create channel-group 0.
> 
> I've gotten bit by that when in a hurry before...