[nsp] Cisco part numbers

[Tim Franklin]

Previously, cisco-nsp-bounces at puck.nether.net <> wrote:
> 	If you have a spare 7500 w/ a VIP available,
> recent versions of software translate this into a FRU.
> 
> 	eg:
> 
>         PA Bay 0 Information:
>                 2CT3+ single wide PA, 2 ports, FRU: PA-MC-2T3+
>                 EEPROM format version 1
>                 HW rev 1.00, Board revision A0
>                 Serial number: 1  Part number: 73-3388-03
> 
>         --Boot log begin--
> 
> 
> 	They don't seem to have done this yet for the 7200 software,
> i'm not quite sure why.

Works for me, 7204VXR/225, 12.2(8)T5:

Slot 1:
        T3+ PA Port adapter, 1 port
        Port adapter is analyzed 
        Port adapter insertion time 20w0d ago
        EEPROM contents at hardware discovery:
        Hardware revision 3.0           Board revision A0
        Serial number     28675313      Part number    73-3762-03
        FRU Part Number:  PA-T3+= Serial

Regards,
Tim.

--
Tim Franklin          ____________
Project Engineer      \C/\O/\L/\T/   Product Engineering &
T: +44 20 7863 5714    V  V  V  V     Customer Solutions
F: +44 20 7863 5876