[nsp] Checking memory on Cisco 7600 with dual Sup2/MSFC2s

[Clinton Work]

Checking the Sup2 memory under Native IOS is quite simple. 
Below, the 7600 prompt is for the MSFC2 and the 7600-sp prompt is for the 
Sup2. 

7600#attach 1
Trying Switch ...
Entering CONSOLE for Switch
Type "^C^C^C" to end this session

7600-sp#show mem
                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)
Processor   42AC8A40   187921856    61641384   126280472    96614592   123793408
      I/O    DE00000    35651584     8724248    26927336    26849008    26927292

7600-sp#exit

[Connection to Switch closed by foreign host]
7600#exit
Connection closed by foreign host.


I originally asked about finding the memory on the standby MSFC2 because
I know that the output from "show ver" on the active MSFC2 is not correct. 

Standby is up
Standby has 227328K/34816K bytes of memory.

The above is the memory reported for the standby Superviser when the Sup2 has
256mb of memory and the MSFC2 has 512mb of memory. I'm either seeing a bug
or the show ver isn't reporting the standby MSFC2 memory.



On Sun, May 11, 2003 at 09:04:12PM -0700, Simon Hamilton-Wilkes wrote:
> Maybe on a 7600 in a backbone scenario, but then dCEF becomes necessary.
> 
> Do you know of a way to show the Supervisor memory usage under Native IOS ?
> 

-- 
=========================================================================
Clinton Work                                        clinton at scripty.com
Calgary, Alberta