[nsp] Checking memory on Cisco 7600 with dual Sup2/MSFC2s

[Clinton Work]

You have to watch the memory on the OSM modules as well. The default
route memory on the OSM modules is 64MB which isn't enough if the 7600 is 
taking a full BGP feed. While the CEF table for a full BGP feed is smaller 
than 64MB, the OSM module needs some memory for IOS and packet buffers. 

You can check the memory on a 7600 OSM module with:
show diagbus <slot>

On Sun, May 11, 2003 at 08:57:27PM -0700, Bradley Dunn wrote:
> 
> The amount of supervisor memory is far from irrelevant. On the Sup2 and 
> Sup720 the supervisor memory holds a CEF table. Bad things happen when 
> the CEF table won't fit.
> 
> Bradley

-- 
=========================================================================
Clinton Work                                        clinton at scripty.com
Calgary, Alberta